Plumber Marietta GA

Plumbing Remodeling: During a kitchen overhaul, I was responsible for realigning plumbing to accommodate a relocated sink and new island fixture. I rerouted hot and cold lines beneath the slab and tied in the waste line using a vented configuration. After a pressure test and inspection, everything passed with flying colors, and the plumbing now supports a sleek new layout.

Outdoor Faucet Repair: The client noticed puddles forming near their garden area due to a persistent drip from the outdoor spigot. I replaced the damaged washer and inspected the vacuum breaker for signs of wear. After confirming the repair held under pressure, I also insulated the faucet to prevent damage during temperature swings.

Bathroom Fixture Repair: The client was frustrated with a faucet that wouldn’t stop dripping and was staining the sink. I disassembled the fixture and found a worn cartridge and corroded valve seat. I replaced both components and reassembled the faucet with a proper seal. The fix stopped the leak and refreshed the fixture’s performance.

Sewer Line Camera Inspection: I was called to investigate repeated drain backups throughout a property. Using a sewer inspection camera, I identified heavy root intrusion nearly 30 feet into the main line. I marked the precise location and proposed a trenchless repair solution. This efficient approach avoided digging up the yard and permanently resolved the recurring issue.

Gas Line Installation: I was contracted to install a gas line for a newly built outdoor pizza oven and grill station. I ensured the routing met all code requirements and used corrosion-resistant piping for long-term durability. After pressure-testing the line and checking all joints for leaks, I confirmed safe and steady gas flow. The homeowner can now enjoy their new outdoor kitchen with confidence.

Plumbing Repairs: I was called to a home with standing water in the shower. I removed the rusted metal drain assembly, cleaned the surrounding piping, and installed a high-quality replacement with a watertight seal. The repair restored full drainage and eliminated further water accumulation.

Plumbing Installation: I upgraded a kitchen faucet for a client requesting a more ergonomic and efficient design. I removed the old fixture, cleaned and resealed the mounting surface, and installed a pull-down sprayer model. I confirmed smooth operation and leak-free performance post-installation.

Plumbing Repair: A client reported continuous toilet running and flushing issues. Upon inspection, I found worn-out flush and fill valve components. I replaced them with high-efficiency, corrosion-resistant parts, restoring optimal performance and helping the homeowner save on water bills.

Plumbing Installation: As part of a guest bathroom update, I installed a modern toilet with water-saving technology. I ensured proper alignment, sealed the wax ring securely, and conducted multiple flush tests to guarantee leak-free operation and full functionality.

This is an estimate to replace 2 hose spigot, one in the front of the property and one in the back of the property with both easy access. **GIOS NOTES 6/9/25** Resolution/Recommendations: I was able to successfully replace both of the front, and back hose bibs with no issues. I fully pressurized the whole system, and tested both hose bibs with no further issues or any leaks.